This page displays a sample summary for Gleason's No. 16 Straight bevel generator that was produced using our CPC-BV1 software. This is how summaries will look when you print them out. Download the demo version from this website and try it out.
| Spec Jobbing Method | No. 62341209 | 31 X 42 T | DP 5.1690 | DATE: 08/03/99 |
| PA 20D 0M | Spiral Angle 34D 0M | Cone Distance 5.0495 | Face Width 1.7500 |
| Machine Location | Index 1.5 | Type 16 | No. 1 | Shaft Angle 90D 0M | ||
| System AGMA 208.02 |
------------------------------------------------------------------------
SPUR BEVEL GEAR SPECIFICATIONS:
| Pinion | Gear | ||||
| Working Depth | 0.3290 | Chord Addendum | 0.200 | 0.130 (outer) | |
| Whole Depth | 0.3650 | Chord Thickness | 0.334 | 0.274 (outer) | |
| Diametral Pitch | 5.1690 | Hand | LEFT | RIGHT |
SPUR BEVEL GEAR DIMENSIONS:
| Pinion | Gear | Pinion | Gear | |||
| Teeth | 31 | 42 | P Apex To Crown | 3.945 | 2.894 | |
| Addendum | 0.199 | 0.130 | Pitch Angle | 36D 26M | 53D 34M | |
| Dedendum | 0.166 | 0.235 | Face Angle | 39D 6M | 55D 27M | |
| Pitch Diameter | 5.9973 | 8.1254 | Root Angle | 34D 33M | 50D 54M | |
| Outside Diameter | 6.317 | 8.280 | Tooth Angle | 1D 49M | 1D 42M | |
| Circular Thick. | 0.3340 | 0.2738 | Dedendum Angle | 1D 53M | 2D 40M | |
| Backlash (Min) | 0.006 | Chordal Thick. (Max) | 0.3308 | 0.2707 | ||
| (Max) | 0.008 | (Min) | 0.3298 | 0.2697 |
Minimum PA (To avoid undercut) 12D 20M
| CUTTER SPECS: | Rough | Finish | Rough | Finish | |
| No. & PA | 20.0 - 120' | #12 - 20.0D | 20.0 - 60' | #30 - 20.0D | |
| Diameter | 9.0 | 9.0 | 9.0 | 9.0 | |
| Point Width | 0.068 | 0.100 | 0.050 | 0.050 | |
| Outside Blade Angle | |||||
| Inside Blade Angle | |||||
| Blade Letter |
Max Limit Pinion Cutter Point Width: 0.050
| No. 16 | ROUGHING | SETTINGS | No. 16 | FINISHING | SETTINGS |
| GEAR | PINION | GEAR | PINION OB | PINION IB | |
| Radial | 4.083 | 4.083 | 3.886 | 3.689 | 3.713 |
| Sliding Base | ADV 0.000 | ADV 0.000 | WITH 0.000 | WITH 0.252 | WITH 0.224 |
| Blank Position | STD | STD | ADV 0.000 | ADV 0.028 | WITH 0.028 |
| Blank Offset | 0 | 0 | 0 | 0 | 0 |
| Cradle Angle | 66D 2M | 293D 58M | 68D 48M | 305D 15M | |
| Tilt Angle | 0 | 0 | 1D 5M | 2D 21M | |
| Swivel Angle | - | - | 44D 14M | 20D 45M | |
| Mach. Root A | 50D 54M | 34D 33M | 49D 37M | 34D 33M | |
| Cr. Test Roll | 30 | 20 | 30 | 20 | |
| Wrk Test Roll | 37D 15M | 33D 40M | 37D 15M | 33D 40M | |
| Nc75 Ratio Grs | 40/41 x 62/87 | 40/46 x 44/55 | 40/41 x 62/87 | 40/46 x 44/55 |
| Finished Pinion | Finished Toplands: | ||
| Slot Widths: | GEAR | PINION | |
| Large End | 0.082 | 0.099 | 0.108 |
| Mid-Face | 0.081 | 0.099 | 0.111 |
| Small End | 0.061 | 0.081 | 0.115 |