This page displays a sample summary for Gleason's No. 104 Straight bevel generator that was produced using our CPC-BV4 software. This is how summaries will look when you print them out. Download the demo version and try it out.
Coniflex Straight Bevel Gear Summary 10 x 15 T DP 3.6640 Date: 07/19/05
PA 24D 0M Cone Distance 2.4601 Shaft Angle 90D 0M
----------------------------------------------------------------------------
STRAIGHT BEVEL GEAR SPECIFICATIONS: Set ID: 32898359
Diametral Pitch 3.6640 Machine Loc: A-123
Face Width 0.8200 Type: No. 104
Working Depth 0.546
Whole Depth 0.597 System: AGMA 208.02
Outer Cone Dist 2.4601
STRAIGHT BEVEL GEAR DIMENSIONS:
Pinion Gear Pinion Gear
Teeth 10 15 P Apex To Crown 1.857 1.195
Addendum 0.342 0.204 Pitch Angle 33D 41M 56D 19M
Dedendum 0.255 0.393 Face Angle 42D 46M 62D 14M
Pitch Diameter 2.7293 4.0939 Root Angle 27D 46M 47D 14M
Circular Thick. 0.4958 0.3616 Tooth Angle 8D 25M 8D 17M
Dedendum Angle 5D 55M 9D 5M Chordal Addendum 0.361 0.208
Outside Diameter 3.298 4.320 Chordal Thick.(Max) 0.4851 0.3531
(Min) 0.4836 0.3516
CUTTER SPECS: Pinion Gear Backlash (Min-Max) 0.008 - 0.011
Cutter Spec. G104E 90T-C G104E110T-D
Blade PA 21D 30M 20D 0M Pattern Length 0.340
Blade Pt Width 0.090 0.110 Profile Factor 0.0000
Finished Slot Widths:
Large End 0.159 0.197 Minimum PA (To avoid
Small End 0.107 0.133 undercut) 23D 55M
MACHINE SETTINGS: Pinion Gear
Cutter Cone Distance 2.050 2.050
Space Angle 3D 20M 3D 45M
Cutter Offset: Upper 0.493 0.494
Lower 0.493 0.494
Sliding Base .9828 -DR .9828 -DR
Machine Root Angle 27D 46M 47D 14M
Cradle Test Roll 20D 0M 20D 0M
Work Test Roll 36D 42M 24D 43M
Minimum Cradle Roll 45D 45M 40D 52M
75 x 54 100 x 36
Index Gears ----------- -----------
30 x 60 30 x 80
Selection Gears G10E-487 G10E-487
Nc/25 Nc/25
Roll Decimal Ratio 0.734149 0.741468
51 x 62 32 x 70
Ratio Roll Gears ----------- -----------
59 x 73 53 x 57
DISCLAIMER: Every effort has been made to generate a complete and correct
machine setup. However, Community PC does not guarantee fitness of this setup
for any purpose to which the setup may be applied. Further, Community PC does
not assume liability, either in part or in whole, for any losses suffered by
user or user's agent that may result from application of this setup or from
any information contained herein.