This sample summary for Gleason® No. 24 Generator was produced by CPC-24 Program.
Dimensions and machine settings are actual printouts from CPC-24. CPC-24 also produces summaries for No. 12 Machine.
Download the demo version from this website and try it out.
No. 24 SPUR BEVEL GEAR SET 23 X 80 T DP 11.4000 PA 20.00 Date: 06/17/16
-----------------------------------------------------------------------------
SPUR BEVEL GEAR SPECIFICATIONS: Customer: ACME Co.
System: AGMA 208.02 Setup ID: 69571784
File Name: spu56514.txt
Shaft Angle 90
Pressure Angle 20
Mach Loc: Bevel gen at BB-12
Diametral Pitch 11.4000 Machine: Spur No. 3
Face Width 0.4600 Type No.: 14
Outer Cone Dist. 3.6509 Index: 30.0
Working Depth 0.1754 Nc75: 75.0
Whole Depth 0.1939 C/Roll: 0.032
SPUR BEVEL GEAR DIMENSIONS:
Pinion Gear Pinion Gear
Teeth 23 80 P Apex To Crown 3.47435 .959889
Addendum (Heel) 0.125 0.051 Pitch Angle 16D 2M 73D 58M
(Toe) 0.123 0.059 Face Angle 18D 15M 75D 1M
Dedendum 0.067 0.141 Root Angle 14D 59M 71D 45M
Pitch Diameter 2.0175 7.0175 Tooth Angle 1D 41M 1D 40M
Outside Diameter 2.2570 7.0457 Dedendum Angle 1D 3M 2D 13M
Circular Thick. 0.166 0.110
Backlash Chord Thick Heel Toe Heel Toe
(Minimum) 0.001 (Maximum) 0.1640 0.1433 0.1095 0.0957
(Maximum) 0.005 (Minimum) 0.1620 0.1415 0.1075 0.0939
Limit Point W. 0.052 0.053 Minimum PA 14.71108
(to avoid undercut)
MACHINE SETTINGS: For pinion and gear:
Pinion Gear Ratio of Roll Gears (Nc75)
Index Ratios 1.30435 0.37500 1.10987
75 x 72 60 x 45 58 x 62
Index Gears ----------- ----------- ------------
69 x 60 80 x 90 40 x 81
Cradle Roll Gears 32/ 58 39/ 51
CONIFLEX DIAL SETTINGS:
Settings shown for tooth bearing (A) Inner Dial 8.71
along 50 % of face width (B) Outer Dial 18.84
Tooth Thickness change per index notch
Pinion 0.0003 Gear 0.0010
Tooth Thickness change per 1 Min. change
on both tooth angle scales 0.0021
ROUGHING MACHINE SETTINGS: Pinion Gear
Root Angle, Roughing 14D 53M 71D 39M
Tooth Angle, Roughing 1D 43M 1D 42M
DISCLAIMER: Every effort has been made to generate a complete and correct
machine setup. However, Community PC does not guarantee fitness of this setup
for any purpose to which the setup may be applied. Further, Community PC does
not assume liability, either in part or in whole, for any losses suffered by
user or user's agent that may result from application of this setup or from
any information contained herein.