Demo Download |
Return to Home Page
Sample Summary for Gleason® No. 16 Spiral Bevel Generator
This page displays a sample summary for Gleason's No. 16 Spiral bevel generator that was produced using our CPC-BV1
software. This is how summaries will look when you print them out.
Download the demo version
from this website and try it out.
Please Note: CPCBV1 is for Intersecting Axes Only! For Hypoid (non-intersecting axes) please see CPC-HYP.
| Spec Jobbing Method | No. 62341209 | 31 X 42 T | DP 5.1690 | DATE: 08/03/99
|
| PA 20D 0M | Spiral Angle 34D 0M | Cone Distance 5.0495 | Face Width 1.7500
|
| Machine Location | | Index 1.5 | Type 16 | No. 1 | | Shaft Angle 90D 0M
|
| | | | | | | System AGMA 208.02
|
SPUR BEVEL GEAR SPECIFICATIONS:
| | | | | Pinion | Gear
|
| Working Depth | 0.3290 | | Chord Addendum | 0.200 | 0.130 (outer)
|
| Whole Depth | 0.3650 | | Chord Thickness | 0.334 | 0.274 (outer)
|
| Diametral Pitch | 5.1690 | | Hand | LEFT | RIGHT
|
SPUR BEVEL GEAR DIMENSIONS:
| | Pinion | Gear | | | Pinion | Gear
|
| Teeth | 31 | 42 | | P Apex To Crown | 3.945 | 2.894
|
| Addendum | 0.199 | 0.130 | | Pitch Angle | 36D 26M | 53D 34M
|
| Dedendum | 0.166 | 0.235 | | Face Angle | 39D 6M | 55D 27M
|
| Pitch Diameter | 5.9973 | 8.1254 | | Root Angle | 34D 33M | 50D 54M
|
| Outside Diameter | 6.317 | 8.280 | | Tooth Angle | 1D 49M | 1D 42M
|
| Circular Thick. | 0.3340 | 0.2738 | | Dedendum Angle | 1D 53M | 2D 40M
|
| Backlash (Min) | 0.006
| | | Chordal Thick. (Max) | 0.3308 | 0.2707
|
| (Max) | 0.008
| | | (Min) | 0.3298 | 0.2697
|
Minimum PA (To avoid undercut) 12D 20M
| GEAR | | PINION
|
| CUTTER SPECS: | Rough | Finish | Rough | Finish
|
| No. & PA | 20.0 - 120' | #12 - 20.0D | 20.0 - 60' | #30 - 20.0D
|
| Diameter | 9.0 | 9.0 | 9.0 | 9.0
|
| Point Width | 0.068 | 0.100 | 0.050 | 0.050
|
| Outside Blade Angle | | | |
|
| Inside Blade Angle | | | |
|
| Blade Letter | | | | |
|
Max Limit Pinion Cutter Point Width: 0.050
| No. 16 | ROUGHING | SETTINGS
| No. 16 | FINISHING | SETTINGS
|
| | GEAR | PINION | GEAR | PINION OB | PINION IB
|
| Radial | 4.083 | 4.083 | 3.886 | 3.689 | 3.713
|
| Sliding Base | ADV 0.000 | ADV 0.000 | WITH 0.000 | WITH 0.252 | WITH 0.224
|
| Blank Position | STD | STD | ADV 0.000 | ADV 0.028 | WITH 0.028
|
| Blank Offset | 0 | 0 | 0 | 0 | 0
|
| Cradle Angle | 66D 2M | 293D 58M | 68D 48M | 305D 15M
|
| Tilt Angle | 0 | 0 | 1D 5M | 2D 21M
|
| Swivel Angle | - | - | 44D 14M | 20D 45M
|
| Mach. Root A | 50D 54M | 34D 33M | 49D 37M | 34D 33M
|
| Cr. Test Roll | 30 | 20 | 30 | 20
|
| Wrk Test Roll | 37D 15M | 33D 40M | 37D 15M | 33D 40M
|
| Nc75 Ratio Grs | 40/41 x 62/87 | 40/46 x 44/55 | 40/41 x 62/87 | 40/46 x 44/55
|
| | Finished Pinion | | Finished Toplands:
|
| | Slot Widths: | GEAR | PINION
|
| Large End | 0.082 | 0.099 | 0.108
|
| Mid-Face | 0.081 | 0.099 | 0.111
|
| Small End | 0.061 | 0.081 | 0.115
|