Meshing With Gears
Demo Download | Return to Home Page

Sample Spread Blade Summary for Gleason® No. 16 Spiral Bevel Generator (Cutter Tilt Used)

This screen displays a sample summary for No. 16 Spiral bevel generator that was produced using CPC-SB (Spread Blade) software. This is how your summary will look when you print it. Shown below are Tooth Dimensions, No. 16 gear and pinion finish settings, and Cutter specification.

 Spiral Bevel Gear Summary No. 38747218                  Date: 05/14/12
 File Copy: Summary/sps87321.txt         Comb.   8 X  37    DP  3.03800
 PA 20      Spiral Angle  35    Cone Dist. 6.230     Face Width   1.654

 No. 16  Generator Machine: mach2               File Name: sps87321.txt
 Mean Spiral Angle:  35D  0M            No. 16   Method: Duplex Sp Blade

 Shaft Angle:  90

                    GEAR     PINION                       GEAR    PINION
 Addendum           0.169     0.413     Norm Chord Adden          0.451
 Working Depth           0.582          Norm Chord Thick          0.628
 Whole Depth             0.644          Backlash Allowed 0.012 / 0.022
 Pitch Angle       77D 48M   12D 12M    Dedendum          0.475   0.231
 Face Angle        80D 36M   17D 15M    Hand of Spiral    RIGHT   LEFT
 Root Angle        72D 45M    9D 24M    Cutting Method   DUPLEX  DUPLEX
 Dedendum Angle     5D  3M    2D 48M    Circular Thick            0.634
 Outside Diameter  12.250     3.442
 Cone Center                            Tooth bearing: 25.64 % (Approx)
         to Crown   1.152     6.002
 Cone Center
         to Back  _________ _________

           GEAR                                    PINION
   Cutter Specifications:                  Cutter Specifications:
 Cutter Diameter        12.000           Cutter Diameter        12.000
 Point Width            0.147            Point Width            0.147
 Cutter Number (Calc)  13.5000           Cutter Number (Calc)  13.5000
 Cutter Number (Used)  17.5000           Cutter Number (Used)  17.5000


 GEAR:                                  PINION:
 Radial              5.16681          Radial              5.16681
 Cradle Angle       67D 35M           Cradle Angle       292D 25M
 Sliding Base        0.14165 WITH     Sliding Base        0.14165 WITH
 Machine Root Angle  72D 45M          Machine Root Angle   9D 24M
 Vertical Offset:   4.91491 Above     Vert. Offset:       4.91491 Below
                            Center                                Center

 Tilt Angle        359D 20M           Tilt Angle           0D 40M
 Swivel Angle      327D 25M           Swivel Angle        32D 35M

 30-N Index         30/74x100/50       30-N Index         60/32x100/50

 Nc/75 Ratio 0.5047     Ratio gears 33/58x55/62

 Every effort has been made to generate a complete and correct machine
 setup. However, CommunityPC does not guarantee fitness of this setup
 for any purpose to which the setup may be applied. Further, CommunityPC
 does not assume liability, either in part or in whole, for any losses
 suffered by user or user's agent that may result from application of
 this setup or of any information contained herein.