CPC-THREAD Milling Machine Setup
Cutter
& Thread Specifications - Inch Dimensions
Machine: Machine Formula:
TMILL
#5 LEAD = 1.000000 X
LEAD
Cutter
Description:
.19824 Minimum Tool
Width (inch)
.04673 Point
Width (inch)
Thread
Specification System:
Normal Diametral Pitch (2.25/DP System)
Thread
Description:
3
Entry 3.000 Major Dia.
(inch)
0.1875 Whole
Depth (inch) 0.0833 Addendum (inch)
.13090 Pitch
line 2.8333 Pitch Dia. (inch)
Thickness (inch) 2.6250
Minor Dia. (inch)
Axial Dimensions:
.78847348 Lead
(inch) 12.0000 DP
.26282449
Pitch (inch) 2.117 Module
3.80482 Threads Per Inch
(TPI) 22.000 22.078 PA
Cutter Head
Setting:
5.0621 Helix
angle (Decimal Degrees)
5 Degrees 4 Minutes
Change Gear
Set Aux. Gear Set
Driver x
Driver Driver
------------------- ---------
Driven x
Driven Driven
71 x 85
-------------- 1:1
86 x 89
Distance
between Change Gear Fixed shafts:
12.000 Inch
Change Gear
Equivalent NDP: 12.000
Over Pin
Measurements:
Pin Size
(inch) Backlash Allowance Measurement (inch)
0.14120
Minimum 0.0000 MIN. 3.02745
Maximum 0.0000 MAX. 3.02745
DISCLAIMER: Every effort has been made to generate a
complete and correct
machine setup. However, neither Community PC nor its
representatives
guarantee fitness of this information for any purpose to
which the
information may
be applied. Further, neither Community PC nor its
representatives assume liability, either in part or in
whole, for
any losses suffered by user or user's agent that may result
either
from application of this setup or from use of any
information
contained herin.