This page displays a 1 page sample data sheet for Dimensions and machine settings
for No. 116 gear and pinion finishing. Note that this is a Hypoid summary with pinion offset.
HYPOID FORMATE GEAR/GEN PINION Bevel Data Set No. 72477238 Date: 10/16/16
Comb. 10 X 41 DP: 4.97000 Offset: DN 1.500 HFU Method UNITOOL
Face Width: 1.250 Shaft Angle: 90
Pressure Angle: 21D 15M Machine No. 116 Cone Distance: 4.274
----------------------------------------------------------------------------
TOOTH PROPORTIONS PINION GEAR PINION GEAR
Pitch Diameter 2.012 8.249 Hand of Spiral Left Right
Pitch Angle 13D 58M 74D 49M Cutting Method Two Cut Two Cut
Addendum 0.311 0.064 Roughing Cutter Point Width
Dedendum 0.111 0.359 Leaves .020 stk 0.039 0.056
Dedendum Angle 1D 5M 5D 43M Finishing Cutter ID Diameter
UCP-55 9.000
Face Angle 19D 18M 75D 59M
PINION & GEAR DIMENSIONS
Root Angle 12D 52M 69D 6M Circular Pitch 0.6321
Outside Dia 3.386 8.283 Working Depth 0.375
P Apex to Crn 4.050 0.944 Whole Depth 0.422
Mean Spiral Angle 49D 57M 26D 16M Clearance 0.0471
Backlash Min Max
Tooth Taper TILTED ROOT 0.000 0.000
------ GEAR SETTINGS ------------ ------ PINION FINISHING SETTINGS ------
I.B. O.B. O.B. I.B.
Cutter Number UCP-55 Cutter Number UCP-55
Cutter Diameter 9.000 Cutter Diameter 9.000
Cradle Angle 337D 3M Cradle Angle 147D 30M 147D 30M
Eccentric Angle 60D 43M Eccentric Angle 60D 29M 61D 11M
Swivel Angle 97D 53M 277D 53M Swivel Angle 202D 22M 200D 55M
Spindle Rot. Angle 4D 50M Spindle Rot. Angle 78D 15M 82D 9M
Sliding Base ADV 0.098 WTH 0.098 Sliding Base WTH 0.005 ADV 0.025
Machine Root Angle 64D 29M Mach. Root Angle 0D 0M
Machine Center to Back - At Mounting Distance WTH 0.071
Blank Offset 0 Blank Offset DN 1.500 DN 1.500
Set-Over 24 Away Set-Over 23 Toward
Index Gears 48/82X75/80 Index Gears 75/60X90/50
Nc/50 Ratio Gears - Nc/50 Ratio Gears 59/57x61/77
m50= 0.82000000
Cradle Test Roll Locked Cradle Test Roll 20D 0M 20D 0M
Work Test Roll Cradle Work Test Roll 82D 0M
----------------------------------------------------------------------------
DISCLAIMER: Every effort has been made to generate a complete and correct
machine setup. However, neither Community PC nor its representatives
guarantee fitness of this setup for any purpose to which the setup may be
applied. Further, neither Community PC nor its representatives assume
liability, either in part or in whole, for any losses suffered by user or
user's agent that may result either from application of this setup or from
use of any information contained herein. Version: 1.0023