Meshing With Gears
Demo Download | Return to Home Page

This page displays a 1 page sample data sheet for Dimensions and machine settings
for No. 16 gear and pinion finishing. Note that this example is a Hypoid summary with pinion offset.

 HYPOID FORMATE GEAR/GEN PINION Bevel Data Set No. 84980243  Date: 04/21/15
 Comb.   9 X  55  DP: 11.70000  Offset: DN 0.472         HFU Method UNITOOL
 Face Width:  0.730                               Shaft Angle:   90
 Pressure Angle:   22D 30M    Machine No. 16      Cone Distance: 2.381
 Pitch Diameter        0.769    4.701     Hand of Spiral  Left     Right
 Pitch Angle          8D 56M   80D 50M    Cutting Method  Two Cut  Two Cut

 Addendum             0.000    0.025      Roughing Cutter Point Width
 Dedendum             0.044    0.139      Leaves .020 stk -.005     0.018

 Dedendum Angle       0D 47M    3D 55M    Finishing Cutter ID      Diameter
                                                       UCP-35       6.000
 Face Angle          12D 45M   81D 38M
                                         PINION & GEAR DIMENSIONS
 Root Angle           8D  9M   76D 55M    Circular Pitch  0.2685

 Outside Dia          1.159     4.709     Working Depth  0.145
 P Apex to Crn        2.332     0.360     Whole Depth    0.164

 Mean Spiral Angle   46D 56M   33D 30M    Clearance  0.0192
                                          Backlash  Min    Max
 Tooth Taper  TILTED ROOT                          0.002  0.003

 ------ GEAR SETTINGS ------------   ------ PINION FINISHING SETTINGS ------
                 I.B.        O.B.                           O.B.      I.B.
 Cutter Number       UCP-35          Cutter Number             UCP-35
 Cutter Diameter        6.000        Cutter Diameter           6.000
 Radial          1.9238     1.9238   Radial              2.3567     2.3549
 Cradle Angle    75D 22M    75D 22M  Cradle Angle        278D 32M   278D 32M
 Tilt Angle     357D 30M   357D 30M  Tilt Angle         359D 50M    359D 46M
 Swivel Angle   324D 31M   324D 31M  Swivel Angle          3D  1M    15D  2M

 Sliding Base  ADV 0.145  WTH 0.117  Sliding Base       WTH 0.013  ADV 0.211
 Machine Root Angle    75D 40M       Mach. Root Angle            0D  0M

  Machine Center to Back - At Mounting Distance ADV 0.013

  Blank Offset           0          Blank Offset     DN 0.472     DN 0.472

  Set-Over            14 Away       Set-Over                 70 Toward

   Index Gears      60/55X40/80     Index Gears            100/45X75/50

  Nc/75 Ratio Gears   -             Nc/75 Ratio Gears      48/60x55/90
                                    m75= 0.48888889
  Cradle Test Roll    Locked        Cradle Test Roll      20D  0M   20D  0M
  Work Test Roll      Cradle        Work Test Roll             122D 13M

CPC-UNI has created this summary by first calculating a No. 116 summary, and
then converting No. 116 settings to No. 16 settings.

DISCLAIMER: Every effort has been made to generate a complete and correct
machine setup. However, neither Community PC nor its representatives
guarantee fitness of this setup for any purpose to which the setup may be
applied. Further, neither Community PC nor its representatives assume
liability, either in part or in whole, for any losses suffered by user or
user's agent that may result either from application of this setup or from
use of any information contained herein.