Re: external spline data


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]

Posted by parmu on October 30, 2009 at 06:34:01:

In Reply to: Re: external spline data posted by lbmakem on October 18, 2009 at 16:16:01:

Hi, there is one way out to arrive at the module and PA. measure the measure over pin in 3 different pins. Pins should be appprox in steps of 0.05mm. Now using the Pin Span measurment calculation sheet, use one pin & over pin dimnsion as a reference, try to claculate the measure over pin for a second pin and third pin. If the second / third value matches with the measured value, your assumption of 1m and 45PA is right. here the catch is you have to assume a module and PA. In case of difficulty send me the measure over 3 different pin size, i will help


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Meshing with Gears Discussion Forum ] [ FAQ ]