Ash Gear and Supply
Together with... Meshing With Gears are proud to offer...

CPC-UNI - For Gleason® Nos. 16, 106, 116, 108 and 118 Spiral Bevel Generators

This program creates summaries for Gleason® Nos. 16, 106, 116, 108 and 118 Spiral Generators using the Unitool Method. These machines use special rotary face milling style cutters with specially ground segments that will produce profile and lengthwise ease off. In other words, cutters produce a tooth bearing pattern that is usually sufficient. Location of tooth bearing is adjustable without bias corrections, but by simple movement of the pinion controlled by the operator. A wide range of gearset specs, both hypoid and spiral, can be manufactured with minimal tooling inventory. CPC-UNI provides default input values where possible. Default input values may be changed, but CPC-UNI informs you of questionable choices. Help screens that assist in your decision making may be viewed during summary creation.
 
Select the target machine, enter your gear specs and tooling choices, and CPC-UNI creates a complete summary of machine settings.
 
Use it during your quote phase to avoid surprises and unforseen problems. Identify jobs requiring special tooling (as you know, customers have been known to send out "difficult" jobs).

CPC-UNI's unique features at a glance:
All machine constants are built into program for Nos. 16, 106, 116, 108 and 118 machines.
    Summaries are clearly identified and saved separately for each different machine No.
Default dimensions and tooling choices based on industry standards
Optionally enter dimensions and make tooling selections as necessary
Suggests correct long (pinion) & short (gear) addendums
    Necessary in high ratio sets where small number of pinion teeth would
    otherwise result in undercut.
Choice of Service Class and Pressure Angle
    One of three systems or a custom system may be selected.
Saves setup/summary history to an internal database
    You may rerun an old summary, make changes and save, or save as new.
No graphs, tables, or calculator necessary
    Your "What-if" studies are greatly simplified since no graphical lookups or calculations are required.
Uses change gear inventory that comes standard with machine
    Optionally avoid conflicts between Index and Ratio gear sets if shop has only one inventory. Otherwise selects "best" ratio gear set if multiple inventories are available.
Complete dimension sheet and machine settings are displayed
    Blank dimensions, user choices, gear sets, and all machine settings can be printed out for use at machine.
    Uses the Windows Print Manager so you can select printer and other print options.
Comes complete with on-line context sensitive help screens
    As you move from input to input, the F1 key "keeps up" with you.
    F1 always displays help and suggestions for the current input.
   
Choose a link below to see a sample summary for your machine:

    Sample Hypopid summary for No. 16 Machine
    Sample Spiral summary for No. 116 Machine
    There are many possible combinations of machine and method. These are just two examples.
    If you would like a free summary for your machine and to your gearset specs, just email your
    request.
   

CPC-UNI Price:
780.00 USD

Note: A special discount (50% off) is available to licensees of CPC-BV1 or CPC-26 programs.

Download and Upgrade to the latest version: No Charge to registered users.

 



How do I obtain a license and activate the software?
Install CPC-UNI demo on your PC and check it out. When you are satisfied and ready to purchase a license, call Scott Atkinson at Ash Gear & Supply (248) 374-6155. Scott will ask you for the COMPUTER ID NUMBER and will give you an ACTIVATION KEY.

The updated ID and Activation key pairs are all numerical.

Where do I find the COMPUTER ID NUMBER?
Be sure you have installed the demo on the computer where you intend to run the software. The ID Number is different for each PC. Start up the demo and select "READ & ACTIVATE". Then select "I AGREE". The next screen displays the ID number for the software on your computer.

What is an ACTIVATION KEY?
An activation key is a string of characters that, when typed into the activation screen, turns the demo into a fully functional software solution. Also, all future software updates will respect the activation key on the same PC.

You may install and run CPC software on a Local Area Network system, but the license and ID Number (and its Activation Key) will correspond only to the workstation from which you run the software.

Test the demo, ask questions, and/or request a free setup for your machine and your gear specs before you purchase a user license. We want you to be satisfied and convinced that CPC-UNI meets your requirements and makes you more productive.
Once you have received an ACTIVATION KEY, the sale is final.

Tech Support Resources for Registered Users
Ash Gear and CommunityPC want you to be successful. To that end, we offer you comprehensive on-line context sensitive help
and the
Meshing With Gears website. There you will find a FAQ page detailing many common gear cutting issues.

An active "All Things Gearing" Forum is hosted there for any general question you might have about gearing and gear machines.

If you have a problem that you can't resolve, don't hesitate - start the dialog. Email Tech Support with a description
of the problem you're having. Detail is good.

When you need additional Activation keys or help with CPC-UNI, Email your request for a new activation key.
Be sure to include the Computer ID in your email message. Pay close attention to the letters and numbers.
Watch out for these especially - I1, Z2, and UV - They can be easily confused!

Email works best in these situations because it gives tech support a written reference for study,
and gives you a record of the conversation and solution.
If you must speak to a "live" voice, then please contact Scott Atkinson at Ash Gear and Supply (248) 374-6155 .

 



Return to Ash Gear & Supply